JIANGSU HAOHUA INDUSTRY GROUP

Home
About Us
Products
High Alloy Materials
Process
Equipment
Technology
Standards
Inspection
Quality Assurance
Market
Contact Us
Products

Welded Stainless Steel Pipe

Your position: Home > Products > Stainless Steel Pipes > Welded Stainless Steel Pipe > ASTM Decoration Welded Stainless Steel Pipe

ASTM Decoration Welded Stainless Steel Pipe

CONSULTATION SEND E-MAIL
  • ASTM Decoration Welded Stainless Steel Pipe

Product Information

ASTM Decoration Welded Stainless Steel Pipe

Welded and drawn is the preferred tubing choice in terms of economy, lead time and tolerancing compared to seamless in most instances.

On our welded and drawn tubing line, we offer:
Lowest minimums in the industry and competitive pricing
In-stock random lengths - typically ship same day of order if placed before 1pm EST
Hundreds of thousands of feet of unlisted non-standard sizes in stock
Custom tubing you need---cheaper, faster and better than the others
ALLOYS
Mostly 304 & 316; also 321, 347, 600 and 52.
Other alloys on request.
SIZES
0.005" OD and up, most of our stock is .375" OD or less.
Wall thicknesses .002" through .040".
LENGTHS
5' or 10' standard.
Can be cut shorter or manufactured longer on request.
Continuous coils are also available upon request.
FABRICATION
We've made complex parts that are used in high tech medical devices, nuclear applications and have parts being used on the planet Mars right now! See our
A WORD ON OUR WELDED AND DRAWN PROCESS...
The flagship lines of stainless steel and alloy tubing for hypodermic needles provided by Haohua Industry  Needle Company are manufactured using the T.I.G. (Tungsten Inert Gas) welded and plug (floating or mandrel) drawn process with full hard temper (typically 150 KPSI minimum). This process has been the "gold standard" for all medical grade tubing for hypodermic needles since the 1960's. The significant amount of cold work put into the material from the drawing process results in the best finishes and hardest tempers (tensile strength) achievable. Burr removal is easiest in the full hard temper condition as chips break off versus "gummy bending" at lower tensile strengths.

Consultation

Product Name: *
Your Name: *
Your Tel: *
Your Mail: *
Your Country: *
Inquiry: *

Friendly link

Contact us